This Polyurethane anti slip floor paint is based on a high quality resin system with fine crushed dolomite incorporated in it to give a simple to apply low profile anti-slip finish. It is suitable for application to most surfaces and provides a hard wearing finish that is resistant to water, oil and many standard chemicals.
The product is ideal for general walkways, factory and garage floors. It will provide excellent durability and colour retention.
The benefits of the paint are:
- Easy to apply straight from the tin.
- Self priming direct from the tin, when applying to absorbent materials such as bare concrete the first coat should be diluted 10% with white spirit.
- Suitable for application in low temperatures (5oC)
- Water, Oil and chemical resistant.
- Tolerant to mild existing contamination.
- Hard wearing and durable finish
- Suitable for commercial environments
- Won't cause flash rust on exposed metals
- Reduces dust and is easy to clean
- Cost effective protection.
Colours: Red (04C39), Green (14C39), Grey (00A05), Blue (20D45), Safety Yellow (10E53) and Black
Realistic coverage: 8 - 10 sq metres per litre
Dry to Touch: 2-4 hours at 20oC with some ventilation/air movement.
Overcoating Time: 16 hours (do not exceed 5 days for over-coating)
Curing: Suitable for light traffic after 24 hours and fully cured after 5/7 days.
Application: Easy to apply with standard short/medium pile rollers or by brush.
Please note we supply this product in 4 easy to use and convenient 5 litre tins.
Click here to see a colour guide.
*Please note that the BS 4800 codes and samples shown are intended only as an approximate guide. Colours will vary depending on the settings of your monitor and the light that you view it in. The BS 4800 codes are the nearest colour references available but are not necessarily an exact match.
|
