NVP’s two part water based epoxy floor paint (available with or without an anti-slip additive) is a two part, water based high resin content epoxy floor coating for all applications where a high durability paint that is resistant to oil, grease and most chemicals is required. It is easy to apply with a standard roller or brush and has the added advantage of very low odour during application and curing. Once fully cured you are left with a very tough, non-toxic, waterproof and easy to clean surface.
Colours (according to BS4800): Black, White, Light Grey (00A05), Mid Grey (00A09), Blue (20D45), Red (04C39), Green (14C39) and Safety Yellow These colour references are approximate due to the nature of the product. Other colours can be made to order, please phone for details and prices.
PRODUCT USES
- For application in areas where solvent based paints are unsuitable.
- As a high durability coating for all floor areas such as warehouses, workshops, garages, showrooms etc.
- Solvent free making it ideal for use in hospitals, kitchens and areas of food preparation.
- Because it is oil and grease resistant it is ideal for garage floors.
- Chemical resistant so ideal for areas of food manufacture and storage. i.e. dairies, grain silos, breweries, abattoirs and fisheries.
- Suitable for application to concrete, brick, stone and timber. Can be applied to asphalt but we recommend a test area is done first.
- Can be used as a tough coating on ply lined vehicles etc.
ADVANTAGES
- Tough and hard wearing, suitable for vehicle traffic.
- Excellent resistance to abrasion.
- Easy to apply, no skilled labour required.
- Will not taint water or food once cured.
- Bonds to most surfaces except unprimed metal.
- Anti-slip option is available.
- Resists oil, grease and petrol.
- Suitable for internal or external use (depending on conditions should last for 3 - 5 years minimum).
COVERAGE
- Approximately 5 – 7 m2 / litre. On uncoated surfaces we recommend applying 2 coats.
- When applying to absorbent surface such as bare concrete or ply the first coat should be diluted by an additional 10% of clean water.
- Apply with short pile rollers or brush
SLIP RESISTANCE
NVP's two part epoxy floor paint has been independently tested when mixed with NVP's anti-slip additive and gives a SRV of 67 in the dry and 61 in the wet. Using the UK slip resistance group guidelines these give an extremely low potential for slip in the dry and a low potential in the wet. Please note however there are many variables involved in the slip resistance of a surface so these can only ever be used as a guide.
*Please note that the BS 4800 codes and samples shown are intended only as an approximate guide. Colours will vary depending on the settings of your monitor and the light that you view it in. The BS 4800 codes are the nearest colour references available but are not necessarily an exact match.
|
